If you enter a sweep expedia promo codes march 2015 angle that is not divisible by the sector angle, abaqus/CAE rounds up to the next number that.
For information on related topics, click any of the following items.
Cut, sweep from the main menu bar or select the equivalent tool from the Part module toolbox.As you define your sweep feature, you can apply a twist or draft.Sketch Origin field in the prompt area: Select, auto-Calculate to place the sketch origin automatically.Click the Sweep/Extrude tab in the dialog box that appears.For more information about these tools, see.To create a swept feature, select.You can either accept the default depth by selecting Auto-compute, or you can specify a custom depth by typing a positive number (in model units) in the Specify field.If a symbol plot is displayed, the model is extruded disney employee dining discounts as specified, but the symbols appear only on the original planar model faces.Select, specify to define a custom sketch origin.Figure 1150, valid and invalid sweep paths.Abaqus/CAE highlights the selected edge, enters the Sketcher again, and rotates the part so that the Sketcher grid lies on a plane normal to the beginning of the sweep path with the sweep path direction pointing out of the screen.Abaqus/CAE displays only the specified sectors (whether or not they are adjacent).Click the arrow next to the Sector selection field to choose from the following available sweep methods: By Number This is the default sweep method.If the region has more than one valid sweep path, you can click.By Angle The sector angle (the angle between each sector) is given in the dialog box.Axisymmetric analytical rigid surfaces can be rotated about an axis (swept as can the following elements: acax n, CAX n, caxa n, cgax n, dcax n, dccax n, dsax n, FAX n, MAX n, mgax n, RAX n, SAX n, and saxa.Specify the sweep angle by typing a number (in degrees) in the Sweep from field (the default is 0) and a number (in degrees) in the To field (the default is 180 for all models).Toggle on Keep profile normal constant to maintain the same profile orientation along the entire sweep path.
If a contour plot is displayed, the contours appear on all swept faces.
As you increase the number of segments, curves in the model appear smoother (the angle between them decreases).